ASUS P4S800D-X USB DRIVER DOWNLOAD

Connect the fan cables to the fan connectors on the motherboard, making sure that the black wire of each cable matches the ground pin of the connector. There is a separate sub-menu for each IDE device. Ensure that the power cord is plugged to a grounded power source, so that the system has a standby power. Make sure to unplug the power supply before adding or removing DIMMs or other system components. When lit, the green LED indicates that the system is ON, in sleep mode, or in soft-off mode, a reminder that you should shut down the system and unplug the power cable before removing or plugging in any motherboard component. Contact a qualified service technician or your retailer.

Uploader: Tojalkis
Date Added: 27 August 2005
File Size: 6.61 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 58269
Price: Free* [*Free Regsitration Required]

Note the notches on the card golden fingers to ensure that they fit the AGP slot on the motherboard. Setting to Auto allows the system to detect the presence of USB devices at startup. Write down the BIOS file name to a piece of paper.

Refer to the corresponding section for each utility. The screen displays the status of the update process.

The copy can be used as a backup in case the system BIOS fails or gets corrupted. This Mic pink jack connects a microphone.

  EP8KDA7I AUDIO DRIVER

The number of device items that appear on the screen depends on the the number of devices installed in the system. At the DOS prompt, type the command line: When the BIOS update process is complete, reboot the system. The items in this menu are auto-detected by P4s800d-c.

Install the necessary drivers to activate the devices. Select ub item then press Enter to display the configuration options. Removing the cap will cause system boot failure!

Asus P4S800D-X User Manual

Turn OFF jsb computer and unplug the power cord. When installing long AGP cards, it is recommended to install the memory modules first.

Limited allows change to only selected fields, such as Date and Time. You need to type the exact BIOS file name at the prompt.

Do not place the product in any area where it may become wet. Even if you are not prompted to use the Setup program, you may want to change the configuration of your computer in the sub.

Locate the pin ZIF socket on the motherboard. This jack connects to external audio output devices. To set a User Password: After you have set a password, this item shows Installed. To display the sub-menu, select the item and press Enter. The system may become unstable and may experience difficulty powering up if the power supply is inadequate. Doing so will damage the asua

  ASTRA 5800 SCANNER DRIVER DOWNLOAD

Asus P4SD-X – Best Compatible Asus P4SD-X Mobo

Click Start, then select Run. Processor This item displays the auto-detected CPU specification. Select an item then press Enter to display the sub-menu.

The CD automatically displays the Drivers menu if Autorun is enabled in your computer. Uusb will decrease the time needed to boot the system.

The functions of the Line Out, Line In, and Microphone jacks change when you select the 6-channel audio configuration as shown in the following table. Position the CPU above the socket such that its marked corner matches the base of the socket lever. If you made changes to fields other than system date, system time, and password, the BIOS asks for a confirmation before exiting.

Related Posts