As mentioned before, try disabling this option. Using an 8bpp, the colour will then be displayed incorrectly. Composite sync on green. Download free driver for Chips and Tech. This is useful to see that pixmaps, tiles, etc have been properly cached. XFree86 releases later than 4.

Uploader: Fenrirr
Date Added: 8 October 2017
File Size: 66.20 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 12584
Price: Free* [*Free Regsitration Required]

It has the same ID and is identified as a when probed. This option forces the two display channels to be used, giving independent refresh rates. The xx MMIO mode has been implemented entirely from the manual as I don’t have the hardware to test it on. Abd chipsets that support hardware cursors, this option enforces their use, even for cases that are known to cause problems on some machines.

Which is the reason for the drop in the dot clock. Dual-head display has two effects on the modelines. The effect of this is that the maximum dot clock visible to the user is a half or a third of the value at 8bpp.

But all adn good time. Also the maximum size of the desktop with this option is x, as this is the largest window that the HiQV multimedia engine can display. With this option all of the graphics are rendered into a copy of the framebuffer that is keep in the main memory of the computer, and the screen is updated from this copy.


Information for Chips and Technologies Users

This is the first chip of the ctxx series to support fully programmable clocks. However there are many older machines, particularly those with x screen or larger, that need to reprogram the panel timings. The server will limit the maximum dotclock to a value as specified by the manufacturer. The default behaviour is to have both the flat panel and the CRT use the same display channel and thus the same refresh rate.

Pcci this version of the Chips and Technologies driver has many new features and bug fixes that might make users prefer to use this version.

Display might be corrupted!!! A sample of an incomplete ” xorg. Many potential programmable clock register setting are unstable. Hence you will see a line like. This option, selects an 18 bit TFT bus.

Chips and Technologies

Using this option the mode can be centered in the screen. Try reducing the amount of memory consumed by the mode. For this reason it is recommended to use one of the programs that automatically generate xorg. Yech you see such display corruption, and you have this warning, your choices are to reduce the refresh rate, colour depth or resolution, or increase the speed of the memory clock with the the ” SetMClk ” option described above.

Some machines that are known to need these options include.

Chips and Tech. PCI PCI Drivers – Download Device Drivers – –

If the colours seem darker than they should be, perhaps your ramdac is has 8 significant bits. It is possible to force the server to identify a particular chip with this option.


For the HiQV series of chips, the memory clock can be successfully probed. So this limit will be either 56MHz or 68MHz for the xx chipsets, depending on what voltage they are driven with, or 80MHz for the WinGine machines.

Possibly useful if you wish to use an old workstation monitor. The xx chipsets can use MMIO for all communications with the video processor. This option forces the second display to take a particular amount of memory.

Quite the contrary, both GPUs tecu from the etalons, chiefly due to the integration of Gaming App brand utility; the latter enables GPUs to run in one of three available modes: Therefore the server uses a default value of For this reason a mode that is as close to VESA like as possible should be selected.

However luckily there are many different anc register setting that can give the same or very similar clocks.

Related Posts